A hard disk is a digital storage unit used in computers and laptops. Since operating systems, programs for many activities, and more are installed in these virtual memory units. While it is true that hard drives are indispensable. They must also be replaced from time to time, as their storage capacity is not infinite. If you want to learn how to clone a hard drive then read this article till the end carefully.
If you want to successfully clone your old hard drive to a newer one with higher capacity, don’t miss the next article. Next, in Studyspecial, we will teach you how to clone a hard drive from start to finish with a simple step by step. Let’s go there!
- 5 apps to learn languages during the quarantine
- How to analyze a case study
- Development of the essay: How to do it?
How to Clone an SSD Hard Drive
Before cloning an SSD hard drive, you must take into account the characteristics of the motherboard of the computer. And consider whether it is compatible with the SSD. For its part, you should also pay attention to the capacity of the SSD. Since it must have a minimum of storage the same as the hard disk or the partition that will be cloned.
Prepare the data on the old hard drive before cloning to prevent the cloned drive from containing junk information or outdated programs that only slow down the computer. Make sure to create a backup copy on another disk or partition before cloning, so if something goes wrong, you can recover everything with a backup. Do you want to know how to clone an SSD hard drive?
Follow these steps:
- The first thing you should do is choose a specialized application or program with which you are going to clone your hard drive to an SSD. You can use Acronis True Image, one of the most reliable programs. If you don’t want to spend money, you can also appeal to free programs like CloneZilla or PartChone, which can also help you.
- Once you install the cloning program, you will have to turn off the computer and connect the SSD. Next, you will have to turn on the computer and start the cloning program. Keep in mind that most software uses the same procedures.
- Once the program is open, choose the source or HHD disk and then the SSD as the destination disk.
- The next step will be to configure cloning settings. These are mostly predetermined. Once this is done, click on the “Start” button and wait for the program to finish the cloning process.
- For your computer to start with the SSD, you will have to reboot and enter the BIOS to configure booting. Each computer model enters this menu with a different key, but the most common are the f8 and f10.
- Once you are in the BIOS menu, look for the “boot order” section, and select the SSD to leave it as the primary one. Once this is done, save the changes by clicking on the “Exit” option and accepting when it asks if you want to save the changes. After this step, the system will reboot … and you’re ready to go!
How to clone a hard drive with Windows 7
If you are thinking of cloning your old disk with little capacity in a new one and with much more storage, in addition to talking about your Windows 7 operating system, (because it is safer than reinstalling all the software again), you should follow the steps that we present below :
- To begin this process, you must have cloning software. You can get the EaseUS Disk Copy or one of the ones mentioned above.
- After installing the program you have selected, and if it is the case of EaseUS Disk Copy, you must activate it, run the program and select the option “Disk mode”.
- There, you will have to choose the hard disk that you want to clone and then click on “continue”.
- The next step will be to choose the destination drive and click on “next” and “accept” (the latter only if you want to delete the data from the old hard drive).
- Then, in the pop-up window, you will have to select the distribution of the disk; that is, if you want to create partitions and in which one will the clone be.
- Keep in mind that the new hard drive or partition where the cloned system will be hosted must have at least the same storage capacity as the old hard drive.
- Finally, you will have to hit “Start” and wait for the program to finish cloning.
How to Clone an External Hard Drive
Cloning an external hard drive to an external one has its advantages: the first one is that you will have a secure and identical backup of the original one. Also, in case it has an operating system installed, you can start it on any compatible computer or check its data through the USB outputs. To know how to clone an external hard drive you should pay attention to the following steps:
- The first thing you should know if you have a Windows operating system is that these do not have the default option to clone in any of their versions. This means that you must find some software to perform the cloning. Now if you are just going to clone data; images, videos, various files, etc., you can back up from one external disk to another without further ado.
- When you already have the cloning software installed, like the AOMEI Backupper Standard, all you have to do is run it. Once the program is open, select “Clone Disk”.
- Subsequently, you will see two options. The first will ask you to choose which disk will be cloned, and you must select it. The second will ask you to select the destination disk, in which the clone will be housed. Choose well where you will save your cloning.
- Once you have done the above, you will only have to start cloning by clicking on the “Start” button. It will be ready!